Up for sale is an all handmade 24mm Baseball Glove Watch Strap.
I made this strap from 3 Rawlings logo’s leftover from a few different black baseball gloves. Gold lettering on black baseball gloves tends to wear off over time, so finding 3 Rawlings logo’s in this good of shape is a rare find.
This baseball glove strap measures 24mm (no taper), 78 mm x 131 mm x ~4.7 mm thick. I hand stitched this strap with gold waxed synthetic thread.
This strap features “Rawlings” on the short side and “Rawlings” on the long side. The strap comes with one floating keeper, also “Rawlings” ;-D. The first hole is 50mm from the lug. Extra holes can be punched upon request.
The strap comes with a custom Mott screw-in Pre-V style bronze buckle. I also have custom Mott stainless steel and black PVD buckles, which can be exchanged at no additional charge. If not specified, the strap will ship with the buckle as shown.
Sizing: Baseball glove straps that are over 4.5mm tend to wear a bit smaller than their dimensions, since most OEM straps are less than 4 mm thick. If you’re on the fence, I can try the strap on one of my watches. If you’re still not sure, I’d suggest you go with a longer strap or reach out about a custom strap.
Most of my straps will also work with Apple watches. I can test fit adapters on them to make sure there is enough clearance. Please ask before purchasing.
Why Baseball Glove Straps?
Baseball gloves are soft, thick and only get better with time. What better material to make into a watch strap?! The glove and thus the strap is soft yet durable and has acquired patina and character during its lifetime.
The strap is made 100% from the glove it came from, making each strap a limited edition! Mott Straps is the only strap maker using the glove for the entire strap - even the bottom layer. You get the look and the feel of a baseball glove with a Mott Strap.
The softness of glove leather makes the thickness work well on any watch, but especially with larger watches such as Panerai, Kaventsmann, Ennebi, Omega, etc.
Up for sale is an all handmade 24mm Baseball Glove Watch Strap.
I made this strap from 3 Rawlings logo’s leftover from a few different black baseball gloves. Gold lettering on black baseball gloves tends to wear off over time, so finding 3 Rawlings logo’s in this good of shape is a rare find.
This baseball glove strap measures 24mm (no taper), 78 mm x 131 mm x ~4.7 mm thick. I hand stitched this strap with gold waxed synthetic thread.
This strap features “Rawlings” on the short side and “Rawlings” on the long side. The strap comes with one floating keeper, also “Rawlings” ;-D. The first hole is 50mm from the lug. Extra holes can be punched upon request.
The strap comes with a custom Mott screw-in Pre-V style bronze buckle. I also have custom Mott stainless steel and black PVD buckles, which can be exchanged at no additional charge. If not specified, the strap will ship with the buckle as shown.
Sizing: Baseball glove straps that are over 4.5mm tend to wear a bit smaller than their dimensions, since most OEM straps are less than 4 mm thick. If you’re on the fence, I can try the strap on one of my watches. If you’re still not sure, I’d suggest you go with a longer strap or reach out about a custom strap.
Most of my straps will also work with Apple watches. I can test fit adapters on them to make sure there is enough clearance. Please ask before purchasing.
Why Baseball Glove Straps?
Baseball gloves are soft, thick and only get better with time. What better material to make into a watch strap?! The glove and thus the strap is soft yet durable and has acquired patina and character during its lifetime.
The strap is made 100% from the glove it came from, making each strap a limited edition! Mott Straps is the only strap maker using the glove for the entire strap - even the bottom layer. You get the look and the feel of a baseball glove with a Mott Strap.
The softness of glove leather makes the thickness work well on any watch, but especially with larger watches such as Panerai, Kaventsmann, Ennebi, Omega, etc.
