26mm Barry Bonds Baseball Glove Watch Strap Panerai Kaventsmann Giants 90/141
Up for sale is an all handmade 26mm Baseball Glove Watch Strap. The glove used for this strap was a Barry Bonds autograph Wilson baseball glove.
Barry Bonds played 22 seasons in Major League Baseball. Bonds was a member of the Pittsburgh Pirates from 1986 to 1992 and the San Francisco Giants from 1993 to 2007. He is considered to be one of the greatest baseball players of all time. Bonds’ stats are just incredible and it’s hard to just list a few. He was such a fearsome hitter that it became the norm to walk him if a base was open. There were even times when he was intentionally walked with the bases loaded.
This baseball glove strap measures 26mm (no taper), 90 mm x 141 mm x ~5.0 mm thick. I hand stitched this strap with black Tiger thread - the best waxed synthetic thread available.
This strap features the “Barry Bonds Signature Edition” logo on the short side and the “Barry Bonds” autograph on the long side. The strap comes with one large floating keeper “Wilson”. The first hole is 50mm from the lug. Extra holes can be punched upon request.
The strap comes with a custom Mott screw-in Pre-V style PVD buckle. I also have custom Mott bronze and stainless steel buckles, which can be exchanged at no additional charge. If not specified, the strap will ship with the buckle as shown.
Sizing: Baseball glove straps that are over 4.5mm tend to wear a bit smaller than their dimensions, since most OEM straps are less than 4 mm thick. If you’re on the fence, I can try the strap on one of my watches. If you’re still not sure, I’d suggest you go with a longer strap or reach out about a custom strap.
Most of my straps will also work with Apple watches. I can test fit adapters on them to make sure there is enough clearance. Please ask before purchasing.
Why Baseball Glove Straps?
Baseball gloves are soft, thick and only get better with time. What better material to make into a watch strap?! The glove and thus the strap is soft yet durable and has acquired patina and character during its lifetime.
The strap is made 100% from the glove it came from, making each strap a limited edition! Mott Straps is the only strap maker using the glove for the entire strap - even the bottom layer. You get the look and the feel of a baseball glove with a Mott Strap.
The softness of glove leather makes the thickness work well on any watch, but especially with larger watches such as Panerai, Kaventsmann, Ennebi, Omega, etc.
Up for sale is an all handmade 26mm Baseball Glove Watch Strap. The glove used for this strap was a Barry Bonds autograph Wilson baseball glove.
Barry Bonds played 22 seasons in Major League Baseball. Bonds was a member of the Pittsburgh Pirates from 1986 to 1992 and the San Francisco Giants from 1993 to 2007. He is considered to be one of the greatest baseball players of all time. Bonds’ stats are just incredible and it’s hard to just list a few. He was such a fearsome hitter that it became the norm to walk him if a base was open. There were even times when he was intentionally walked with the bases loaded.
This baseball glove strap measures 26mm (no taper), 90 mm x 141 mm x ~5.0 mm thick. I hand stitched this strap with black Tiger thread - the best waxed synthetic thread available.
This strap features the “Barry Bonds Signature Edition” logo on the short side and the “Barry Bonds” autograph on the long side. The strap comes with one large floating keeper “Wilson”. The first hole is 50mm from the lug. Extra holes can be punched upon request.
The strap comes with a custom Mott screw-in Pre-V style PVD buckle. I also have custom Mott bronze and stainless steel buckles, which can be exchanged at no additional charge. If not specified, the strap will ship with the buckle as shown.
Sizing: Baseball glove straps that are over 4.5mm tend to wear a bit smaller than their dimensions, since most OEM straps are less than 4 mm thick. If you’re on the fence, I can try the strap on one of my watches. If you’re still not sure, I’d suggest you go with a longer strap or reach out about a custom strap.
Most of my straps will also work with Apple watches. I can test fit adapters on them to make sure there is enough clearance. Please ask before purchasing.
Why Baseball Glove Straps?
Baseball gloves are soft, thick and only get better with time. What better material to make into a watch strap?! The glove and thus the strap is soft yet durable and has acquired patina and character during its lifetime.
The strap is made 100% from the glove it came from, making each strap a limited edition! Mott Straps is the only strap maker using the glove for the entire strap - even the bottom layer. You get the look and the feel of a baseball glove with a Mott Strap.
The softness of glove leather makes the thickness work well on any watch, but especially with larger watches such as Panerai, Kaventsmann, Ennebi, Omega, etc.
Up for sale is an all handmade 26mm Baseball Glove Watch Strap. The glove used for this strap was a Barry Bonds autograph Wilson baseball glove.
Barry Bonds played 22 seasons in Major League Baseball. Bonds was a member of the Pittsburgh Pirates from 1986 to 1992 and the San Francisco Giants from 1993 to 2007. He is considered to be one of the greatest baseball players of all time. Bonds’ stats are just incredible and it’s hard to just list a few. He was such a fearsome hitter that it became the norm to walk him if a base was open. There were even times when he was intentionally walked with the bases loaded.
This baseball glove strap measures 26mm (no taper), 90 mm x 141 mm x ~5.0 mm thick. I hand stitched this strap with black Tiger thread - the best waxed synthetic thread available.
This strap features the “Barry Bonds Signature Edition” logo on the short side and the “Barry Bonds” autograph on the long side. The strap comes with one large floating keeper “Wilson”. The first hole is 50mm from the lug. Extra holes can be punched upon request.
The strap comes with a custom Mott screw-in Pre-V style PVD buckle. I also have custom Mott bronze and stainless steel buckles, which can be exchanged at no additional charge. If not specified, the strap will ship with the buckle as shown.
Sizing: Baseball glove straps that are over 4.5mm tend to wear a bit smaller than their dimensions, since most OEM straps are less than 4 mm thick. If you’re on the fence, I can try the strap on one of my watches. If you’re still not sure, I’d suggest you go with a longer strap or reach out about a custom strap.
Most of my straps will also work with Apple watches. I can test fit adapters on them to make sure there is enough clearance. Please ask before purchasing.
Why Baseball Glove Straps?
Baseball gloves are soft, thick and only get better with time. What better material to make into a watch strap?! The glove and thus the strap is soft yet durable and has acquired patina and character during its lifetime.
The strap is made 100% from the glove it came from, making each strap a limited edition! Mott Straps is the only strap maker using the glove for the entire strap - even the bottom layer. You get the look and the feel of a baseball glove with a Mott Strap.
The softness of glove leather makes the thickness work well on any watch, but especially with larger watches such as Panerai, Kaventsmann, Ennebi, Omega, etc.